ME9.2 (E53, E46)
Добавлено: 19 июн 2017, 15:45
BMW_Isn supports ISN reading from Bosch ME9 (E46 E53)
You can use any suitable K-Line BMW interface. Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) You must apply two powers, ground and pin 7 from K-Line interface.
Run software, adjust COM PORT, press Read, and wait for read ISN
You can use any suitable K-Line BMW interface. Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) You must apply two powers, ground and pin 7 from K-Line interface.
Run software, adjust COM PORT, press Read, and wait for read ISN