ME9.2 (E60, E65, E70, E90)
Добавлено: 19 июн 2017, 15:48
BMW_Isn supports ISN reading from DME Bosch ME9 (E60_E65_E70)
Use any suitable K-Line (E60_E65) or D-CAN (E70) BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)with D-CAN interface
You must apply two powers, ground CAN High and CAN Low from D-CAN interface
Run software, adjust COM PORT, press Read, and wait for read ISN
Use any suitable K-Line (E60_E65) or D-CAN (E70) BMW interface
Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)with D-CAN interface
- image001.jpg (33.9 КБ) 42039 просмотров
Run software, adjust COM PORT, press Read, and wait for read ISN
- image001.jpg (30.33 КБ) 42039 просмотров