MS45 (Е46,Е83)
Добавлено: 19 июн 2017, 15:55
BMW_Isn supports ISN reading from DME Siemens MS45
You can use any suitable K-Line interface.Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) You must apply two powers,ground and pin 7 from K-Line interface.
Run software , adjust COM PORT,press Read, and wait for read ISN
You can use any suitable K-Line interface.Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) You must apply two powers,ground and pin 7 from K-Line interface.
Run software , adjust COM PORT,press Read, and wait for read ISN