Страница 1 из 1

MS43 (Е38,Е39,Е46,Е53)

Добавлено: 19 июн 2017, 16:01
Alexandr
BMW_Isn supports ISN reading from DME Siemens MS43

You can use any suitable K-Line BMW interface. Reading procedure supported via OBD socket directly or on the bench (direct connect to DME)
image001.jpg
image001.jpg (16.87 КБ) 49329 просмотров
You must apply two powers, ground and pin 7 from K-Line interface.
Run software, adjust COM PORT, press Read, and wait for read ISN
image001.jpg
image001.jpg (28.29 КБ) 49329 просмотров