MS43 (Е38,Е39,Е46,Е53)
Добавлено: 19 июн 2017, 16:01
BMW_Isn supports ISN reading from DME Siemens MS43
You can use any suitable K-Line BMW interface. Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) You must apply two powers, ground and pin 7 from K-Line interface.
Run software, adjust COM PORT, press Read, and wait for read ISN
You can use any suitable K-Line BMW interface. Reading procedure supported via OBD socket directly or on the bench (direct connect to DME) You must apply two powers, ground and pin 7 from K-Line interface.
Run software, adjust COM PORT, press Read, and wait for read ISN